This store requires javascript to be enabled for some features to work correctly.

On sale

Leofoto SA-X+MK-40X+GS-3 Outdoors Tripod with Ball Head and Clamp Set | SA-X & 3/8"

Sale price

$469.00

Regular price $469.00
( / )
Size
Free shipping
Click here to be notified by email when Leofoto SA-X+MK-40X+GS-3 Outdoors Tripod with Ball Head and Clamp Set | SA-X & 3/8" becomes available.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

2024 NEW PRODUCT

The Leofoto SA-X Series tripods are one of the most compact collapsed setups on the market with a perfectly balanced weight to strength ratio. The "X" version has a newly designed apex with a rosette connector for SA-X rifle heads AND a 3/8" mounting screw to attach any standard 3/8" head. The rosette connector provides an extremely stable connection between the tripod's apex and the base of the head. The angle stop design has also been improved from the standard pull tab to a knurled bar which allows the user to adjust the angles with only one hand as opposed to two. The SA-X Series offers unparalleled versatility, built as a hunter’s companion who also enjoys long days on the range, but most requested by military, law enforcement, competitive shooters or those simply looking for one of the most compact and reliable shooting supports on the market. The SA-X Series tripods offer maximum rigidity, capable of supporting non-traditional shooting positions with a heavy load capacity. These tripods feature three angle stop positions to increase shooting capabilities and a compact design which maintains a small footprint, creating a tripod setup which is extremely easy to pack and carry on the go.

  • New "X" Version Apex Design: Rosette Connector AND 3/8" Mounting Stud
  • New "X" Version Angle Stop: Allows for one handed angle adjustment
  • Threaded 1/4” accessory socket on the side of the apex to provide the perfect placement of a strap or magic arm for holding anything from an umbrella, phone or even a kestrel
  • Tripods must occasionally withstand tremendous bending and torsion loads. It is crucial that the leg angle stops and all other structural joints are well supported. Leofoto offset leg joints fully support the leg angle stops allowing loads to be transferred straight through the strongest members of the tripod. This also means the tripod is more compact when collapsed
  • Large diameter rubber feet keep leg sidewalls from touching the ground even at the lowest settings and makes positive contact with the ground at virtually any angle
  • Hard anodized, CNC-machined 6061 T6 aluminum hardware
  • Toray Carbon Fiber Leg Tubes
  • Included: Leofoto Tripod Case

The Leofoto MK-40X Rifle Ball Head With Lever-Release Arca Clamp was designed specifically to be used on an SA-X tripod, but it features both the SA-X rosette connection as well as a standard 3/8" mounting socket. The head features an elongated knob for easy locking and unlocking of the ball, accompanied by a smaller tension control knob. The elongated knob is the perfect length to be used with a rifle clamping mount to not interfere with the large mount. The clamp is Arca compatible.

The Leofoto GS-3 Rifle Clamp Mount securely holds equipment without a pre-existing mount port/interface to a tripod. It is fully ambidextrous and features inward-angled jaws that wedge equipment into the clamp for a secure fit. The GS-3 has a double start thread that allows both jaws to move together, providing a center of balance for products between 1-3 inches in width. The textured rubber pads on the GS-3 are designed to create maximum surface area grip and hold equipment securely in place, preventing any slipping or movement during use. This rifle clamp mount can be attached to any ballhead or clamp that accepts an arca-type rail and also can be mounted directly to a tripod via a 3/8" mounting stud.

*The Leofoto SA-X series tripods use a new mounting system that can accept both SA-X specific rosette mounting heads as well as any standard 3/8" compatible head.

 

SA-324CX+MK-40X+GS-3

Rosette + 3/8”
X Angle Stops
Tubes: 32/28/25/22mm
With head and rifle mount
Max. height: 1612mm / 63.46in
Min. height: 254mm / 10in
Folded length: 690mm / 27.17in
Leg Section : 4
Weight: 2.30kg / 5.07lb
Max load: 25kg / 55.12lb
SA-324CLX+MK-40X+GS-3 Rosette + 3/8”
X Angle Stops
Long ver.
Tubes: 32/28/25/22mm
With head and rifle mount
Max. height: 1810mm / 71.26in
Min. height: 268mm / 10.55in
Folded length: 743mm / 29.25in
Leg Section : 4
Weight: 2.38kg / 5.25lb
Max load: 25kg / 55.12lb
SA-364CX+MK-40X+GS-3 Rosette + 3/8”
X Angle Stops
Tubes: 36/32/28/25mm
With head and rifle mount
Max. height: 1705mm / 67.13in
Min. height: 248mm / 9.76in
Folded length: 732mm / 28.82in
Leg Section : 4
Weight: 2.70kg / 5.95lb
Max load: 30kg / 66.14lb
SA-363CX+MK-40X+GS-3 Rosette + 3/8”
X Angle Stops
Long ver.
Tubes: 36/32/28mm
With head and rifle mount
Max. height: 1765mm / 69.49in
Min. height: 265mm / 10.43in
Folded length: 870mm / 34.25in
Leg Section : 3
Weight: 2.68kg / 5.91lb
Max load: 35kg / 77.16lb


 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)