This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.
Open box condition, used only for demo purposes.
The Leofoto SA-X Series tripods are one of the most compact collapsed setups on the market with a perfectly balanced weight to strength ratio. The "X" version has a newly designed apex with a rosette connector for SA-X rifle heads AND a 3/8" mounting screw to attach any standard 3/8" head. The rosette connector provides an extremely stable connection between the tripod's apex and the base of the head. The angle stop design has also been improved from the standard pull tab to a knurled bar which allows the user to adjust the angles with only one hand as opposed to two. The SA-X Series offers unparalleled versatility, built as a hunter’s companion who also enjoys long days on the range, but most requested by military, law enforcement, competitive shooters or those simply looking for one of the most compact and reliable shooting supports on the market. The SA-X Series tripods offer maximum rigidity, capable of supporting non-traditional shooting positions with a heavy load capacity. These tripods feature three angle stop positions to increase shooting capabilities and a compact design which maintains a small footprint, creating a tripod setup which is extremely easy to pack and carry on the go.
-
New "X" Version Apex Design: Rosette Connector AND 3/8" Mounting Stud
- New "X" Version Angle Stop: Allows for one handed angle adjustment
- Threaded 1/4” accessory socket on the side of the apex to provide the perfect placement of a strap or magic arm for holding anything from an umbrella, phone or even a kestrel
- Tripods must occasionally withstand tremendous bending and torsion loads. It is crucial that the leg angle stops and all other structural joints are well supported. Leofoto offset leg joints fully support the leg angle stops allowing loads to be transferred straight through the strongest members of the tripod. This also means the tripod is more compact when collapsed
- Large diameter rubber feet keep leg sidewalls from touching the ground even at the lowest settings and makes positive contact with the ground at virtually any angle
- Hard anodized, CNC-machined 6061 T6 aluminum hardware
- Toray Carbon Fiber Leg Tubes
- Included: Leofoto Tripod Case
|
SA-324CX+MA-40X |
Rosette + 3/8” X Angle Stops Tubes: 32/28/25/22mm With head |
Max. height: 1530mm / 60.24in Min. height: 176mm / 6.92in Folded length: 613mm / 24.13in Leg Section : 4 Weight: 1.84kg / 4.06lb Max load: 25kg / 55.12lb |
|
SA-363CX+MA-40X |
Rosette + 3/8” X Angle Stops Long ver. Tubes: 36/32/28mm With head |
Max. height: 1683mm / 66.26in Min. height: 188mm / 7.4in Folded length: 786mm / 30.94in Leg Section : 3 Weight: 2.20kg / 4.85lb Max load: 35kg / 77.16lb |
|
SA-364CLX+MH-60X |
Rosette + 3/8” X Angle Stops Tubes: 36/32/28/25mm With head |
Max. height: 1790mm / 70.47in Min. height: 170mm / 6.69in Folded length: 690mm / 27.17in Leg Section : 4 Weight: 2kg / 4.409lb Max load: 30kg / 66.14lb |
|
SA-402CX+MA-40X |
Rosette + 3/8” X Angle Stops Tubes: 40/36mm With head |
Max. height: 1618mm / 63.7in Min. height: 205mm / 8.07in Folded length: 1004mm / 39.53in Leg Section : 2 Weight: 2.39kg / 5.27lb Max load: 50kg / 110.234lb |
| SA-403CX+MH-60X | Rosette + 3/8” X Angle Stops Tubes: 40/36/32mm With head |
Max. height: 1604mm / 63.14in Min. height: 212mm / 8.35in Folded length: 785mm / 30.91in Leg Section : 3 Weight: 2.99kg / 6.59lb Max load: 50kg / 110.23lb |
| SA-404CX+MH-60X | Rosette + 3/8” X Angle Stops Tubes: 40/36/32/28mm With head |
Max. height: 1650mm / 64.96in Min. height: 200mm / 7.87in Folded length: 680mm / 26.77in Leg Section : 4 Weight: 2.5kg / 5.51lb Max load: 50kg / 110.23lb |
| SA-404CLX+MH-60X | Rosette + 3/8” X Angle Stops Tubes: 40/36/32/28mm With head |
Max. height: 1848mm / 72.76in Min. height: 211mm / 8.31in Folded length: 748mm / 29.45in Leg Section : 4 Weight: 3.21kg / 7.08lb Max load: 40kg / 88.18lb |